top of page
Nicslab
Book a video meeting with Nicslab
Quote

Thermal Control of an External Heat Load with the Nicslab XDAC

A closed temperature loop built from one XDAC-8MUB-R4G8, a thermoelectric cooler, and an NTC thermistor, run from a Python script using SCPI.

Rev 1.0  ·  PDF, 10 pages  ·  Free scripts and data

Thermoelectric cooler on a heat sink with a resistive heat load and thermistor
APPLICATION NOTE, AN-XDAC-001

Download the note and the free files

The note as a PDF (10 pages) and a ZIP with the scripts and recorded data (18 files).

The download opens on Nicslab File Share. Enter your email there, and we send you a code to start the download. XDACfunctions.py is part of the Nicslab Premium package and is not in the ZIP.

SUMMARY

What this note shows

Measurement

Closed-loop temperature control of a 1 W resistive heat load, using a thermoelectric cooler (TEC) and a negative temperature coefficient (NTC) thermistor.

Instrument

Nicslab XDAC-8MUB-R4G8 multichannel source measure unit (SMU), with four of its eight channels used.

Control

Python using SCPI (Standard Commands for Programmable Instruments) over an Ethernet connection, with a proportional-integral-derivative (PID) loop running on the workstation and updating every 0.5 s.

Result

Temperature stability between 25 °C and 37 °C, with a standard deviation of 0.005 °C to 0.011 °C, read from the thermistor inside the loop at about 29 °C ambient.

Prerequisites

The Nicslab Premium package (XDACfunctions.py) and Python 3.12 or later.

Files

Recorded data and Python scripts, listed below.

The values in this note were measured on one instrument under the conditions described. They are not specifications. See the datasheet for limits.

CONTENTS

Inside the note

  1. Why use a multichannel SMU

  2. The experiment: hold a 1 W heat load at a set temperature

  3. Method: a PID loop in Python using SCPI

  4. Results: the loop holds setpoints from 25 °C to 37 °C

  5. What the results show

  6. Experimental limits

  7. Four XDAC channels run a stable temperature loop

  8. Files and document control

DOWNLOADS

Files provided with this note

File

Contents

Access

XDAC-8MUB-R4G8-ContrT-Note.py

Control script: connection, setpoints, and control loop

Free download

read-output-ContrT-Note.py

Analysis script: plots and statistics

Free download

XDACfunctions.py

XDAC function library, including the PID routine

Premium package

Steps.csv

Recorded data, setpoint steps (Figure 6)

Free download

2Stable24.csv to 2Stable38.csv

Recorded data, constant setpoints (Figures 7 and 8)

Free download

The values in this note were measured on one instrument under the conditions described. They are not specifications. See the datasheet for limits.

bottom of page