top of page
Multi-Channel Connectivity For Your DUT
Introduce Multiconnector as a peripheral device for XPOW / XDAC that provides scalable channel configurations and multiple connector options for different testing setups.
What is Multiconnector?
Multiconnector is a peripheral device designed to extend the connectivity capability of XPOW / XDAC. It provides multiple channel configurations and connector options, allowing the setup to be adapted to different Device Under Test (DUT) requirements.
01.
Connect
Connect the Multiconnector to the XPOW / XDAC system.
02.
Configure
Select the appropriate channel capacity and connector configuration.
03.
Test
Connect the available interface to your Device Under Test (DUT).
Specifications
Nicslab provides six Multiconnector models to match different dimension and connector requirements.
MODEL | CHANNEL | DIMENSION | CONNECTOR CONFIGURATION | DATASHEET |
|---|---|---|---|---|
M1 | 40 CH | 12 × 16 cm | 2×20 pins, 2×24 pins, 2×50 pins, 2(2×20 pins), 16×1 pins | Download |
M2 | 120 CH | 20 × 30 cm | 3×50 pins, 2(6×20 pins) | Download |
M3 | 40 CH | 20 × 30 cm | 2(2×20 pins), 2×20 pins | Download |
M4 | 40 CH | 10 × 20 cm | 2×24 pins, 2×50 pins, 2(2×20 pins), 2×25 pins | Download |
M5 | 120 CH | 20 × 30 cm | 2(6×20 pins), 10×25 pins | Download |
M6 | 40 CH | 12 × 16 cm | 2(2×20 pins), 16×1 pins, 2×40 pins, 1×50 pins | Download |
M1 - Multiconnector 40CH (12×16 cm)
M4 - Multiconnector 40CH (10×20 cm)
Example of The Setup Diagram
M2 - Multiconnector 120CH (20×30 cm)
M5 - Multiconnector 120CH (20×30 cm)
M3 - Multiconnector 40CH (20×30 cm)
M6 - Multiconnector 40CH (12×16 cm)
bottom of page